Spartan 3 v2 is a purebred CAN bus enabled Wideband Oxygen Controller for the Bosch LSU 4.9 and LSU Adv Wideband sensor with no excess.
Spartan 3 v2 is equipped with, 1x high-performance programmable analog output, 1x standard-performance programmable analog output, CAN bus, Android, and USB.
The advanced design, highest quality components, and extensive factory calibration means 0.01 Lambda accuracy without the need for any calibration.
Spartan 3 V2 is designed with Megasquirt in mind, Megasquirt users can enjoy the most accuracy with Spartan 3 than with any other brand of Wideband Oxygen Controller through the use of CAN connectivity allowing 2 wire connection to the ECU whether you use single or dual widebands! Analog output also available for wiring through the stock o2 sensor wiring.
Easy install; Spartan 3 v2 is made durable and water-resistant to be installed in the engine bay, most installations require only 5 wires.
14Point7 stands behind this product with a warranty that is twice as long as any competing product, 2 years
- Standalone ECU's (Such as PiMP, PiMPx, PiMPxs, PiMPxshift, Microsquirt) require both the controller & sensor
- Controller requires Bosch LSU ADV Sensor for use (or LSU 4.9 sensor if you configure via serial terminal for that sensor).
- Available with and without Solid AFR Gauge or 10-Color Configurable Gauge
- Can use our Perfect Tuning CAN gauge instead of Solid or 10-Color Configurable AFR Gauge to add additional features and programmable I/O's
- If you want to run dual widebands, you need two controllers and two sensors. Can run zero, one, or two gauges.
Features:
- 10ms Response Time
- Compatible with Bosch LSU ADV and Bosch LSU 4.9 sensor. Bosch's newest sensor, LSU ADV, provides a 20x resolution increase over the LSU 4.9. Using LSU 4.9 sensor requires user can change the sensor settings using a serial terminal.
- 1x High Performance Programmable Analog Output, Default is 0-5v = 10-20 AFR linear
- 1x Standard Performance Programmable Analog Output, default is Sensor Heater Status. User changeable to Simulated Narrowband Output
- Compatible with Bosch LSU 4.9, Bosch LSU ADV, and clone LSU 4.9 sensors. The LSU ADV sensor provides a 20x resolution increase over the LSU 4.9. Pre-programmed for ADV sensor
- Lean Burn mode for lean burn applications
- CAN Bus support for the following ECUs; Megasquirt 3 (MS3), Adaptronic, Link, Haltech, HP Tuners, as well as YourDyno dyno controller are supported. More supported devices coming soon via firmware update
- CAN Bus connectivity to any version of PiMP ECU's frees up an additional analog input
- CAN Bus output of Lambda or AFR
- Smart Heatup - RPM Triggered Heating of the oxygen sensor for MS3 (PiMPx/PiMPxs/PiMPxshift) ECU over CAN
- Smart Heatup - Temperature Triggered Heating, Spartan 3 will wait for the Oxygen sensor to be heated to 350C by engine exhaust gas before heating up the sensor
- Does not require Free Air Calibration but it is available. Recommended only for clone LSU 4.9 sensors
- Output Sequencer provides a dual-level precision voltage signal to the Linear Output. This allows you to easily check that the AFR/Lambda seen by any device connected to the Linear Output is accurate, and if not, to generate a 2 point calibration to achieve perfect accuracy.
- Spartan 3 V2 is compatible with Torque OBD App for Android devices to display AFR
- Lambda range of 0.6 (Lambda) to 3.4 (Lambda), equivalent to 8.82 (AFR) to 50 (AFR) for gasoline
- Onboard FTDI based serial-USB converter
- ARM Cortex M4
- 0.1% tolerance components for all components that affect accuracy
- Programmable Linear Output for Increased Sensitivity in your Engine's Intended AFR Range, or to work with Multiple Gauges
- Separate grounds and power connections for LSU Heater and electronics for improved noise performance and improved voltage protection
- Water, Dust, and Dirt Resistant - Can be installed in the engine bay
- Compact Inline Design
- 2-Year Controller Warranty, 3 Month Sensor Warranty
- 60-day Money Back Guarantee
Additional Features + Specifications:
- 8 ft Cable Length
- Total Length with LSU ADV: 9 ft
- Operating Temperature: -40C to +105C (-40F to +221F)
- Accuracy: 0.012 (Lambda), RMS Error of Controller + Sensor
- Resolution: 0.00067 (Lambda)
- Response Time: 10(ms)
- Spartan 3 V2 dimensions: 115mm x 60mm x 26mm
Includes:
- Spartan 3 V2 Lambda Controller Configured for LSU ADV Sensor
- 8ft Cable (Controller to Sensor)
- USB Converter
- 2x Fuse Holder
- 2x 5 Amp Fuse (Replacement Included)
- 2x 1 Amp fuse (Replacement Included)
- Bosch LSU ADV Sensor
- Solid AFR Gauge (Optional)
- 10-Color Configurable AFR Gauge (Optional)
- o2 Bung (Optional)
- o2 Bung Extra Tall Finned (Optional) (Additional Sensor Cooling when sensor is closer than 18" from turbo outlet or exhaust port)
Instructions & Documentation:
- Spartan 3 ADV User Manual: CLICK HERE
- Interfacing with PiMP ECU's via CAN: CLICK HERE
- Perfecting Accuracy with PiMP or Megasquirt ECU's VIDEO: CLICK HERE
Wideband | Spartan 3 V2 | o2 Sensor Lambda Controller Kit | ADV Sensor
- Brand: 14Point7
- Product Code: SP3V2Kit
- Availability: 9
- $239.99
-
$229.99
Available Options
Related Products
PiMPx Standalone Engine Management (Batch Fire EFI)
-For Factory Equipped Batch Fire EFI Applications (83-95 2.3 Mustangs/Rangers, 85-95 Speed Density F..
$869.99 $899.99
PiMPxs Standalone Engine Management (Sequential EFI)
-For Factory Equipped Sequential EFI Applications (86-95 V8 Mustangs, 94-95 Mass-Air V8 F-Series/Bro..
$995.99 $1,099.99
Microsquirt Plug & Play Standalone Engine Management + Harness | 2.3L | Entry Level
Microsquirt is an entry-level ECU designed to control a wide array of applications. In this applicat..
$659.99 $739.99
Wideband | Spartan 2 | o2 Sensor Controller Kit
DISCONTINUED - REPLACEMENT IS THE SPARTAN 3 LITE V2 DO NOT ORDER FROM THIS LISTING, ..
$139.99
Wideband | Spartan 2 | Controller Only (Replacement)
DISCOUNTINUED, REPLACEMENT CONTROLLER IS THE SPARTAN 3 LITE V2 DO NOT ORDER FROM THIS LISTING, ..
$84.99
Wideband | Bosch LSU 4.9 o2 Sensor (Replacement)
Compatible with Spartan 2,AEM Gauge or Inline Controllers, and other controllers that use LSU 4.9 se..
$74.99 $85.99
Gauge | Solid Air/Fuel Ratio | Digital Display
Solid AFR features an attractive digital blue LED display, tinted faceplate, and cutting edge electr..
$49.99
Gauge | Perfect Tuning | All-In-One | Configurable | OLED Display | Megasquirt
DISCOUNTINUED BY MANUFACTURER, DO NOT ORDER FROM THIS LISTINGThis listing only exists so we can..
$999.99 $999.99
PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)
-For Factory Equipped Pre-OBD2 EFI Applications with AOD-E, 4R70W, or E4OD Transmission (F-Series, S..
$1,399.99 $1,529.99
Microsquirt ECU | Transmission Controller | CAN I/O Expansion Module V3.0
The Microsquirt is a small entry-level ECU that comes completely assembled, in a rugged, weatherproo..
$294.99 $339.99
Microsquirt ECU | Transmission Controller | CAN I/O Expansion Module V3.0 + 36" Harness
The Microsquirt is a small entry-level ECU that comes completely assembled, in a rugged, weatherproo..
$329.99 $359.99
Microsquirt 8' Harness
Microsquirt is an entry-level ECU designed to control a wide array of applications. It can function ..
$74.99 $88.99
Microsquirt ECU | Transmission Controller | CAN I/O Expansion Module V3.0 + 8' Harness
The Microsquirt is a small entry-level ECU that comes completely assembled, in a rugged, weatherproo..
$359.99 $387.99
Sensor | GM | MAP | 3 Bar
3 Bar (29 psi) MAP sensor for misc tuning use. Compatible with all engine management and tuning devi..
$29.99
Sensor | GM | IAT | Intake Air Temperature | Open Element
Two wire GM Intake Air Temperature (IAT) Sensor with open element is recommended for forced inductio..
$19.99
Microsquirt Module V2.2
MicroSquirt encapsulates pretty much everything that MegaSquirt has to offer, in a board the size of..
$259.99 $283.99
SCT Power Flash X4 OBD2 Handheld Tuner (1996 & Newer Ford, GM, Mopar)
If you are looking to unlock your 1996 and newer Ford, GM, or Mopar's hidden horsepower, this SCT Po..
$374.99 $399.99
SCT BDX Performance Tuner OBD2 (1996 & Newer Mustang, Modern Ford, GM, Mopar)
If you are looking to unlock your 1996 and newer Ford, GM, or Mopar's hidden horsepower, this SCT&nb..
$374.99 $399.99
SCT Livewire TS+ Performance Tuner & Monitor OBD2 (1996 & Newer Ford, GM, Mopar)
If you are looking to unlock your 1996 and newer Ford, GM, or Mopar's hidden horsepower, this SCT&nb..
$559.99 $599.99
SCT Advantage III Pro Racer Package | Custom Tuning Software | Ford | GM | Mopar
If you are looking to unlock your modern Ford, GM, or Mopar's hidden horsepower, this SCT software i..
$329.99 $349.99
MS3Pro Plug and Play - 96-98 Mustang GT | 96-98 Cobra
Get your 96-98 V8 Mustang GT or 96-98 NA Cobra ‘RACE-READY’ with MS3Pro Plug & Play! This E..
$1,499.99
MS3Pro Plug and Play - 03-04 Mustang SVT Cobra Terminator
Get your 03-04 V8 4V Mustang SVT Cobra ‘RACE-READY’ with MS3Pro Plug & Play! This ECU installs i..
$1,499.99
Sensor | Fuel Composition | Flex Fuel | Ethanol Content
The Continental flex fuel sensor measures the ethanol-gasoline ratio of the fuel being used in a fle..
$79.99 $89.99
PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | V8
-For Factory Equipped Sequential EFI Applications (86-95 Mustangs, 94-95 Mass-Air F-Series/Bronco) ..
$2,019.99 $2,229.99
PiMPxshift w/ Transmission Control + CAS + COP Kit | Sequential or Batch EFI | V8
-For Factory Equipped Sequential or Batch Fire EFI Applications with E4OD or 4R70W Transmission (86-..
$2,499.99 $2,699.99
PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | 4 Cyl
For Factory 4 Cylinder Batch Fire Applications that want to convert to Sequential EFI (Inj..
$1,749.99 $1,829.99
Wideband | Bosch LSU ADV Lambda o2 Sensor (Replacement)
100% Bosch made 14point7 branded LSU ADV Lambda Sensor. Compatible with Spartan 3 Lambda Controller ..
$100.00
Wideband | AEM | X-Series | o2 Sensor Gauge Controller
AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patented..
$199.95 $223.00
Wideband | AEM | X-Series | o2 Sensor Inline Controller
AEM’s X-Series Inline Wideband UEGO Air/Fuel Ratio Controllers are built upon unique, patented, 100%..
$184.95 $206.00
Microsquirt Plug & Play Standalone | 2.3L Ford | Harness Only
This is for people who purchased a Microsquirt ECU before they were aware of our plug and play kit a..
$334.99 $349.99
Gauge Holder | Universal | Adjustable | Billet Aluminum | 52mm | 2 1/16 Inch
Universal CNC machined all-aluminum gauge holder pod. Works great for custom locations. Can be mount..
$29.99 $34.99
MS3Pro Plug and Play - 99-04 Mustang GT | 99-02 NA Cobra | 03-04 Mach 1
Get your 99-04 V8 Mustang GT, 99-02 NA Cobra or 03-04 Mach 1 ‘RACE-READY’ with MS3Pro Plug &..
$1,499.99
Gauge | Air/Fuel Ratio | Configurable | 10 Color LCD | Digital Display
Here we have the 10 color 52mm/2.0" digital air fuel ratio gauge, these are the little gauges develo..
$74.99 $79.99
Tags: Spartan, 3, V2, wideband, o2, lsu, adv, controller, wide, band, wide band, sparton, kit, 2.3L, 2.3, 2.3T, 2.3 Turbo, Ford, Foxbody, V8, Mustang, Ranger, Thunderbird, F150, F250, F250, LIghtning, Merkur, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99