-For Factory Equipped Batch Fire EFI 4 Cyl Applications who want the benefits of coil on plug without converting to sequential fuel injection.

Add 21st Century technology to your mid 80's to mid 90's Ford!

This kit combines two of our other listings for people who want to get it all in one big kit. For complete details about the ECU, CAS, Coil on Plug kits, and IGN-1A Coils, you can view their individual listings below:

PiMPx ECU Details Here
CAS (Cam Angle Sensor) Details Here
Coil on Plug Details Here
IGN-1A Coil Details Here

Instructions & Documentation:
--CAS User Manual: CLICK HERE
--Harness User Manual: CLICK HERE 

Includes:
-PiMPx ECU
-1GB USB Flash Drive (containing all required software, startup instructions, base tune, etc)
-Licensed TunerStudioMS Tuning Software When Software Option is Selected at Checkout ($69.95 value, More Info)
-MegaLogViewer Datalogging Software (More Info)
-USB Tuning Cable - 5' Length
-Silicone Vacuum Hose For Internal MAP Sensor - 6' Length
-PiMPx Engine Management Sticker
-PiMPx Quick Start Guide (Digital/Printable)
-MS3 Advanced Feature Guide (Digital/Printable)
-Online Technical Support via Forum (Support is provided by paid professionals, not other PiMPxs users)
-Online Tuning Guides via Forum
-Online Tutorials via Forum
-CAS (Cam Angle Sensor)
-Coil Near Plug Expansion Harness
-IGN-1A Coil Harness (Connects Direct to Coils)
-IGN-1A Coils x4

Requires:
-Windows 95 or Newer Laptop w/Standard USB Port (Also works with Mac OS X 10.7+ or Linux)
-Wideband o2 Sensor Controller with Analog Output (Available as Add-On, see AEM & Spartan Options HERE)
-Factory Ford Wiring Harness for your Ford vehicle (or purchase new custom PiMPx Harness from Related Products below)
-ACT Sensor for vehicles not factory equipped (ACT Sensor & Wiring Pigtail available in Checkout Options)
-VSS Sensor for vehicles not factory equipped (optional, required if you want to use speed-based features)
-IGN-1A Coil Brackets/Mounts
-Plug Wires

Tested Direct Plug & Play (Batch Fire EFI) Into:
-87-93 2.3 Mustang
-83-86 2.3 Turbo Mustang SVO, Turbo GT
-83-88 2.3 Turbo Thunderbird Turbo Coupe
-85-89 2.3 Turbo Merkur XR4Ti
-87-94 2.3 Turbo Swapped Ranger (TFI Ignition)
-Other vehicles using engine & harness from batch fire applications listed above

Also Capable of Running:
-Virtually any other 4 cyl batch fired EEC-IV EFI (OBD-1, 1983-1995ish) Ford vehicles without computer controlled transmission

If a PiMPx is purchased, no harness modifications other than sequential injector harness mods are required for factory application with sequential EFI provided your application uses the popular “LA3” pinout for 87-88 Thunderbird Turbo Coupe, otherwise for any other Ford ECU, no pin changes are required to run the engine but may be required for fan control, boost control, launch control, and other optional features. Our PM-65 batch fire PiMPx harness found in the related products below will eliminate the need to move pins, removes unused connectors, and labels wires for the new purpose with the PiMPx. . 

All of the software and documentation needed to get you up and running comes on a 1GB USB Flash Drive. That way you don't need wireless internet to access these items. A 20+ page startup guide covers every detail to get you up and running including PiMPx installation, software setup, and hardware configuration. The PiMPx section of our Tech Forum is available to cover any questions you may have that aren't covered in the startup guide.

Note that all PiMPx ECU's are built exactly the same from a hardware standpoint. The end user can configure the PiMPxs to work with the vehicles/engines listed above without needing to send the unit back for upgrading or modification. This means you can use it in a 2.3 powered car. Then if you purchase another 83-95 Ford down the road, you can re-configure it to work in the new car without issue. This is a feature that is exclusive to the PiMPx and not available elsewhere. 

Also note that the PiMPx comes with all features built-in. No need to pay for each feature or send it back to upgrade to additional features (unless they are advanced features that are not listed above). Some features do require some external hardware (nitrous solenoids, boost solenoid, flex fuel sensor, water injection pump, switches or relays, solid state relays, etc.). Also note that you can get $60 worth of software for only $39.99 with this ECU which you will not find anywhere else.

Add Internal Real-Time Baro:
It is rare that our customers use real-time barometric adjustment so we've made it an optional add-on due to the cost of the sensor itself (no reason to have you pay for something you won't use). It's rare to use because it's only really beneficial when you frequently drive over large mountain ranges with over 6000ft of elevation change. It could be considered reasonable to use it if you drive through elevation changes above 2000ft but the benefit is minimal compared to the benefit at higher elevation changes.
Note this has nothing to do with the elevation you live at, it's only related to elevation change while driving (so someone living in Denver that doesn't drive this vehicle over the mountains wouldn't need it any more than someone living at sea level).  

-Not for on-road use in vehicles required to be emissions compliant.

Write a review

Please login or register to review

PiMPx Engine Management + CAS + COP Kit | Batch Fire EFI | 4 Cyl

  • $1,799.99
  • $1,655.99


Available Options


Related Products

Fuel Injectors | Siemens Deka | 60 lb/hr | 630 cc/min | High Impedance | EV1 | 4 Cyl

Fuel Injectors | Siemens Deka | 60 lb/hr | 630 cc/min | High Impedance | EV1 | 4 Cyl

Genuine Authentic Siemens Deka 4 Mototron injectors are a new take on high impedance injectors. Desp..

$219.99 $229.99

PiMP | PiMPx ECU Wiring Harness for Ford 2.3 Engines (Batch Fire)

PiMP | PiMPx ECU Wiring Harness for Ford 2.3 Engines (Batch Fire)

Designed exclusively for our PiMP and PiMPx batch fire ECU's when running a 2.3 Ford based engi..

$535.99 $559.95

Fuel Injectors | Siemens Deka | 80 lb/hr | 875 cc/min | High Impedance | EV1 | 4 Cyl

Fuel Injectors | Siemens Deka | 80 lb/hr | 875 cc/min | High Impedance | EV1 | 4 Cyl

Genuine Authentic Siemens Deka 4 Mototron injectors are a new take on high impedance injectors. Desp..

$234.99 $245.99

Fuel Injectors | FID | 100 lb/hr | 1100 cc/min | High Performance | Flow Matched | 4 Cyl

Fuel Injectors | FID | 100 lb/hr | 1100 cc/min | High Performance | Flow Matched | 4 Cyl

The FID 1100's are EV14 based High Impedance fuel injectors utilizing the latest in fuel injector te..

$389.99 $409.99

Stinger Performance Tech Support Forum

Stinger Performance Tech Support Forum

This link is provided to allow you to search for the forum and be able to find a link to it here. Yo..

$0.00

Boost Controller Kit | Manual |  Universal | Stage 2

Boost Controller Kit | Manual | Universal | Stage 2

This is our mid-level manual boost controller kit. Simple to use manual boost controller aka boost v..

$55.99 $69.99

Master Battery Disconnect with Alternator Circuit

Master Battery Disconnect with Alternator Circuit

Designed to be installed right in your battery cable. Extra heavy duty. Protects against theft and e..

$41.95 $49.95

Master Battery Disconnect with Boots

Master Battery Disconnect with Boots

Designed to be installed right in your battery cable. Extra heavy duty. Protects against theft and e..

$41.95 $49.95

Master Battery Disconnect | Remote Mount | Hidden Toggle Switch

Master Battery Disconnect | Remote Mount | Hidden Toggle Switch

This unit allows the heavy disconnect switch to be hidden in the battery cable circuit while allowin..

$159.99 $169.95

Safe-n-Sound Battery Disconnect | Remote Mount | Hidden Toggle | Key Fob | Single Function

Safe-n-Sound Battery Disconnect | Remote Mount | Hidden Toggle | Key Fob | Single Function

With this nifty setup, one click of the key fob completely shuts down your car's entire electrical s..

$185.99 $194.95

Safe-n-Sound Battery Disconnect | Remote Mount | Hidden Toggle | Key Fob | Four Function

Safe-n-Sound Battery Disconnect | Remote Mount | Hidden Toggle | Key Fob | Four Function

With this nifty setup, one click of the key fob completely shuts down your car's entire electrical s..

$253.99 $264.95

Boost Controller Kit | Manual |  Universal | Stage 3

Boost Controller Kit | Manual | Universal | Stage 3

This is our premium manual boost controller kit. Simple to use manual boost controller aka boost val..

$85.99 $109.99

Digital Dash | 87-93 Mustang | 12.3 Inch | Standard | DD-EFI

Digital Dash | 87-93 Mustang | 12.3 Inch | Standard | DD-EFI

Megasquirt Digital Dash12.3″ Standard PNP Dash for 87-93 Foxbody MustangThe DD-EFI 12.3″ Widescreen ..

$699.95

Digital Dash | 87-93 Mustang | 12.3 Inch | PRO | DD-EFI

Digital Dash | 87-93 Mustang | 12.3 Inch | PRO | DD-EFI

Megasquirt Digital Dash12.3″ Pro PNP Dash for 87-93 Foxbody MustangThe DD-EFI 12.3″ Widescreen Digit..

$999.95

Tags: PiMPx, PiMP, PNP, Plug and Play, Plug & Play, Standalone, Stand, Alone, Tuning, Tune, Programmable, Engine, Management, batch fire, ECU, ECM, Computer, 2.3, 2.3L, 2.3T, Ford, Turbo, Mustang, Thunderbird, Coupe, Ranger, SVO, EFI, Fuel Injection, Controller, Coil On Plug, Coil Near Plug, COP, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, EEC, EEC-IV, EEC-4, EEC4, MS3ProPNP, MS3Pro, PNP, compter, compters, Stand alone power control, unit, module, Stand alone pcu, Obd1 tuner, OBD-1 tuner, Windsor stand alone pcu, Maf conversion, Ford mustang computer, smog, egr, delete,