DISCOUNTINUED BY MANUFACTURER, DO NOT ORDER FROM THIS LISTING
This listing only exists so we can continue to offer info/documentation about the product for customer.

This gauge is compatible with all the Megasquirt based ECU's except the Megasquirt 1. The billet anodized aluminum enclosure and the real carbon face plate give an incredible look. The color OLED display allows to display more information than a standard gauge and the colors are configurable. You can replace an entire dash full of gauges with this single gauge. Actually there are 7 different screens and others will come. 24x multicolor LED gives a quick way to see what's happening. The screen brightness and LEDs adjust itself automatically with the luminosity sensor. This is a display/gauge, it is not a wideband o2 controller. If you want it to display AFR, you need a wideband o2 controller (see our AEM and Spartan Wideband options).

For PiMP | PiMPx | PiMPxs | PiMPxshift | Microsquirt | Megasquirt | MS2 | MS3

One of the biggest features is the alarm module which is very powerful and flexible. It allows to monitor each input and notify when there is something abnormal. 

There are two buttons on the gauge to change the displayed screen and change basic settings. Advanced configuration of the alarms are made through a webpage with a built-in Wi-Fi connection to a smart phone, tablet or laptop.

Check out this video showing us cycling through some of the features: 
 

Display Data:
Available data to display on the gauge with MS2 based products (PiMP, Microsquirt):
-MAP (Manifold Air Pressure)
-RPM
-CLT (Coolant temperature)
-TPS
-IAT or MAT (Intake Air temperature)
-Ignition timing
-AFR1 and 2
-AFR Target
-EGO Correction
-EGT1
-Battery voltage
-Generic Sensor 1 and 2
-VSS (Vehicle speed)

For the MS3 based products (PiMPx/PiMPxs/PiMPxshift), you can display all the above plus:
-MAF (Mass air flow)
-Gear
-Injector timing
-Cam IN and EX positions
-ECU error code
-Fuel Pressure
-Oil temperature
-Oil pressure
-Speed sensors of each wheel
-And much, much more!

Analog Expansion:
The gauge can also be connected to up to 3 sensors with the 3x 0-5v analog inputs and can be used as an expansion board. This means that if there is a sensor connected to the gauge, the ECU can read it over CANBus and display it in TunerStudio and datalog the value.
Alarm Examples:
-Abnormal temperature (oil, coolant, EGT and more).
-Abnormal pressure (oil, boost, radiator and more).
-Air fuel mixture too lean or rich based on specified conditions.
Features:
-Full color 1,7" screen with 160x128 resolution
-24 full-color LEDs
-2 buttons
-3x protected 0-5v analog inputs
-Display battery voltage
-1x Digital input
-1x Digital output
-CANBus communications
-Over 16 configurable alarms
-Configurable with any Wi-Fi equipped devices like smart phones, tablets or laptops. No app needed!
-Auto dimming feature
-Interchangeable carbon faceplate
-8-18v compatible
Optional Compatible sensors (maximum 3 per gauge):
-Any air fuel controller including our Spartan 2 Wideband Controller. 
-Temperature sensors for oil, air, coolant and more.
-Pressure sensor for oil, fuel, coolant and more
-MAP sensor up to 44 PSI of boost!
-Exhaust gas temperature (EGT) 1250 Celsius (2200F)
-Flex fuel (coming soon)
Dimensions:
Compatible with any standard 52mm (2 1/16") gauge pod. 
Overall dimension is 69mm Diameter and 20mm thick!
Instructions & Documentation:
-Quick Start Guide: Click Here
-User Manual: Click Here

To connect to PiMPx/PiMPxs/PiMPxshift, requires expansion port connector and two wires with pins (CAN H & CAN L) which is available in the gauge options drop down menu above.

Write a review

Please login or register to review

Gauge | Perfect Tuning | All-In-One | Configurable | OLED Display | Megasquirt

  • Brand: Perfect Tuning
  • Product Code: OLED Gauge
  • Availability: Out Of Stock
  • $999.99
  • $999.99


Available Options


Related Products

PiMPx Standalone Engine Management (Batch Fire EFI)

PiMPx Standalone Engine Management (Batch Fire EFI)

-For Factory Equipped Batch Fire EFI Applications (83-95 2.3 Mustangs/Rangers, 85-95 Speed Density F..

$869.99 $899.99

PiMPxs Standalone Engine Management (Sequential EFI)

PiMPxs Standalone Engine Management (Sequential EFI)

-For Factory Equipped Sequential EFI Applications (86-95 V8 Mustangs, 94-95 Mass-Air V8 F-Series/Bro..

$995.99 $1,099.99

Microsquirt Plug & Play Standalone Engine Management + Harness | 2.3L | Entry Level

Microsquirt Plug & Play Standalone Engine Management + Harness | 2.3L | Entry Level

Microsquirt is an entry-level ECU designed to control a wide array of applications. In this applicat..

$659.99 $739.99

Wideband | Spartan 2 | o2 Sensor Controller Kit

Wideband | Spartan 2 | o2 Sensor Controller Kit

DISCONTINUED - REPLACEMENT IS THE SPARTAN 3 LITE V2  DO NOT ORDER FROM THIS LISTING, ..

$139.99

Wideband | Spartan 2 | Controller Only (Replacement)

Wideband | Spartan 2 | Controller Only (Replacement)

DISCOUNTINUED, REPLACEMENT CONTROLLER IS THE SPARTAN 3 LITE V2 DO NOT ORDER FROM THIS LISTING, ..

$84.99

Wideband | Bosch LSU 4.9 o2 Sensor (Replacement)

Wideband | Bosch LSU 4.9 o2 Sensor (Replacement)

Compatible with Spartan 2,AEM Gauge or Inline Controllers, and other controllers that use LSU 4.9 se..

$74.99 $85.99

Gauge | Solid Air/Fuel Ratio | Digital Display

Gauge | Solid Air/Fuel Ratio | Digital Display

Solid AFR features an attractive digital blue LED display, tinted faceplate, and cutting edge electr..

$49.99

PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)

PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)

-For Factory Equipped Pre-OBD2 EFI Applications with AOD-E, 4R70W, or E4OD Transmission (F-Series, S..

$1,399.99 $1,529.99

PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | V8

PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | V8

-For Factory Equipped Sequential EFI Applications (86-95 Mustangs, 94-95 Mass-Air F-Series/Bronco) ..

$2,019.99 $2,229.99

PiMPxshift w/ Transmission Control  + CAS + COP Kit | Sequential or Batch EFI | V8

PiMPxshift w/ Transmission Control + CAS + COP Kit | Sequential or Batch EFI | V8

-For Factory Equipped Sequential or Batch Fire EFI Applications with E4OD or 4R70W Transmission (86-..

$2,499.99 $2,699.99

PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | 4 Cyl

PiMPxs Engine Management + CAS + COP Kit | Sequential EFI | 4 Cyl

For Factory 4 Cylinder Batch Fire Applications that want to convert to Sequential EFI (Inj..

$1,749.99 $1,829.99

Wideband | Bosch LSU ADV Lambda o2 Sensor (Replacement)

Wideband | Bosch LSU ADV Lambda o2 Sensor (Replacement)

100% Bosch made 14point7 branded LSU ADV Lambda Sensor. Compatible with Spartan 3 Lambda Controller ..

$100.00

Wideband | AEM | X-Series | o2 Sensor Gauge Controller

Wideband | AEM | X-Series | o2 Sensor Gauge Controller

AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patented..

$199.95 $223.00

Wideband | AEM | X-Series | o2 Sensor Inline Controller

Wideband | AEM | X-Series | o2 Sensor Inline Controller

AEM’s X-Series Inline Wideband UEGO Air/Fuel Ratio Controllers are built upon unique, patented, 100%..

$184.95 $206.00

Microsquirt Plug & Play Standalone | 2.3L Ford | Harness Only

Microsquirt Plug & Play Standalone | 2.3L Ford | Harness Only

This is for people who purchased a Microsquirt ECU before they were aware of our plug and play kit a..

$334.99 $349.99

Gauge Holder | Universal | Adjustable | Billet Aluminum | 52mm | 2 1/16 Inch

Gauge Holder | Universal | Adjustable | Billet Aluminum | 52mm | 2 1/16 Inch

Universal CNC machined all-aluminum gauge holder pod. Works great for custom locations. Can be mount..

$29.99 $34.99

Wideband | Spartan 3 V2 | o2 Sensor Lambda Controller Kit | ADV Sensor

Wideband | Spartan 3 V2 | o2 Sensor Lambda Controller Kit | ADV Sensor

Spartan 3 v2 is a purebred CAN bus enabled Wideband Oxygen Controller for the Bosch LSU 4.9 and LSU ..

$229.99 $239.99

Wideband | Spartan 3 Lite V2 | o2 Sensor Lambda Controller Kit | LSU 4.9 Sensor

Wideband | Spartan 3 Lite V2 | o2 Sensor Lambda Controller Kit | LSU 4.9 Sensor

Spartan 3 Lite v2 is a purebred Wideband Oxygen Controller for the Bosch LSU 4.9 and LSU Adv Wideban..

$132.50 $135.99

Wideband | Spartan 3 Lite V2 | Controller Only (Replacement)

Wideband | Spartan 3 Lite V2 | Controller Only (Replacement)

Controller requires wideband sensor so this listing is for replacing a failed Spartan 3 Lite or Spar..

$79.99 $82.50

Wideband | Spartan 3 V2 | Controller Only (Replacement)

Wideband | Spartan 3 V2 | Controller Only (Replacement)

Controller requires wideband sensor so this listing is for replacing a failed Spartan 3 or Spartan 2..

$129.99 $139.99

Tags: perfect, tuning, all-in-one, gauge, configurable, oled, Megasquirt