Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansion harness that connects to the ECU and runs to the coil harness and CAS. -User supplies coils and coil mounts. This expansion harness plugs into the ECU's expansion port, through the firewall, and to the engine. It is completely independent of the engine harness itself so it works with stock Ford harnesses, or our PiMPx/PiMPxs harnesses. It allows you to ditch the TFI module, stock ignition system/coil, etc. and convert to a modern coil per cylinder/coil near plug/coil on plug ignition system. It's designed to connect directly to our CAS conversion kit or you can ditch the distributor entirely and run a crank trigger and cam sensor of your choosing. The harness connects directly to the stock GM coil harness (the harness that connects 4 LS truck coils to a single connector) or we offer a pigtail to connect it to other coil types like the popular IGN-1A coils.
Features:
--Available for both 2.3L 4 cyl (excluding early style "umbrella" distributor rotor) and V8 applications.
--Fully assembled kit is the connector with 32 wires crimped and installed in the connector, terminated connectors, relays, and wiring loom.
--All wires have their function printed on the wire, and are color coded for ease of use.
--Also contains all of the wires in the standard expansion pigtail that aren't part of the coil/ignition conversion. All of those "extra" wires are rolled up and kept inside the firewall for a clean install. Then you can pull whichever additional features you want to use through the firewall. Complete list of functions is provided in the PiMPxs Startup Guide Table 2.
--Works with stock Ford engine harness or our PiMPx/PiMPxs engine harnesses.
--9ft Total Length.
Includes:
--CAS
--Coil Near Plug Expansion Harness
--LS Coil Sub-Harness (Connects to GM LS Coil Harness) or IGN-1A Coil Harness (Connects direct to coils).
Requires Either:
--LS Truck Coils with Coil Harness (connects four coils to a single connector that plugs into expansion sub-harness)
or
--IGN-1A Coils
--Plug Wires
--Coil Brackets/Mounts
Instructions & Documentation:
--CAS User Manual: CLICK HERE
--Harness User Manual: CLICK HERE
Not for original PiMP
CAS & Expansion Coil/Ignition Harness Kit | V8 | PiMPx | PiMPxs | PiMPxshift
- Brand: Stinger Performance Engineering
- Product Code: CAS+Harness-8
- Availability: 10
- $625.99
-
$599.99
Available Options
Related Products
PiMPx Standalone Engine Management (Batch Fire EFI)
-For Factory Equipped Batch Fire EFI Applications (83-95 2.3 Mustangs/Rangers, 85-95 Speed Density F..
$869.99 $899.99
PiMPxs Standalone Engine Management (Sequential EFI)
-For Factory Equipped Sequential EFI Applications (86-95 V8 Mustangs, 94-95 Mass-Air V8 F-Series/Bro..
$995.99 $1,099.99
PiMPx | PiMPxs | PiMPxshift Expansion Port Pigtail Harness
The expansion port allows for options not supported by the factory harness such as sequential spark ..
$79.99
PiMPxshift Standalone Powertrain Management with Transmission Control (Sequential or Batch EFI)
-For Factory Equipped Pre-OBD2 EFI Applications with AOD-E, 4R70W, or E4OD Transmission (F-Series, S..
$1,399.99 $1,529.99
Coil Near Plug Expansion Harness | For LS Coils or IGN-1A Coils | V8 | PiMPx | PiMPxs | PiMPxshift
This expansion harness plugs into the ECU's expansion port, through the firewall, and to the engine...
$304.99 $329.99
CAS & Expansion Coil/Ignition Harness Kit | 4 Cyl | PiMPx | PiMPxs
Includes both our CAS (cam angle sensor) that bolts to the stock distributor as well as the expansio..
$569.99 $589.99
Cam Angle Sensor | CAS | TFI Distributor Conversion Kit
This kit is designed to work with Ford TFI distributors and PiMP, PiMPx, PiMPxs, PiMPxshift, Megasqu..
$299.99 $329.99
Coil Near Plug Expansion Sub-Harness for LS Coils | PiMPx | PiMPxs | PiMPxshift
This expansion sub-harness plugs into the Coil Near Plug Expansion Harness and to the GM coil harnes..
$64.99
IGN-1A Smart Coil | Coil On Plug | Coil Near Plug
This High Output Ignition Coil is an inductive smart coil capable of producing extremely high spark ..
$69.99 $79.99
Coil Brackets | IGN-1A Smart Coils | Remote Mount | Billet Aluminum
These brackets can be used to mount our IGN-1A Smart Coils (also sold by Holley, AEM, AMP EFI, etc.)..
$59.99 $49.99
Wiring | IGN-1A Smart Coil | Connector | Pigtail | 48"
This pigtail harness plugs into the IGN-1A coils (Stinger Performance, DIY, Holley, AEM, etc.) and a..
$13.99
Coil Near Plug Expansion Sub-Harness for IGN-1A Coils | PiMPx | PiMPxs | PiMPxshift
This expansion sub-harness plugs into the Coil Near Plug Expansion Harness and to the IGN-1A Coils. ..
$119.99
Coil Near Plug Expansion Harness | For LS Coils or IGN-1A Coils | 4 Cyl | PiMPx | PiMPxs
This expansion harness plugs into the ECU's expansion port, through the firewall, and to the engine...
$274.99 $289.99
IGN-1A Smart Coil Crimp Connector With Pins
This connector plugs into the IGN-1A coils and allows you to crimp the included pins directly to you..
$5.29
PiMPxshift w/ Transmission Control + CAS + COP Kit | Sequential or Batch EFI | V8
-For Factory Equipped Sequential or Batch Fire EFI Applications with E4OD or 4R70W Transmission (86-..
$2,499.99 $2,699.99
Tags: PiMPx, PiMPxs, PiMPxshift, Expansion, Harness, coil, CAS, Kit, IGN-1A, LS, LSx, coil on plug, cop, coil near plug, cnp, V8, 5.0, 5.8. 302, 351, 460, Mustang, Thunderbird, Bronco, F150, F250, F350, Lightning, Windsor