High flow billet aluminum fuel rail for Ford 2.3 engines with a square intake manifold (as shown in ported intake manifold listing). Has -8 AN threaded ports on both ends for fuel inlet/outlet, as well a 1/4-18 auxiliary port between the injectors that can be used if there is minimal clearance at one end. Also included is a 1/8-27 NPT threaded port for a schrader valve or fuel pressure gauge. You'll need to purchase the appropriate fittings to adapt this rail to the factory lines, or aftermarket lines.

This fuel rail is available with or without the adapter block that allows you to run your factory style (86-93 V8 or 83-86 2.3) stock or aftermarket fuel pressure regulator. If you don't use the adapter block, you'll need to purchase an inline fuel pressure regulator that you can mount in the fuel return line. See other product listing (or related products below) for Rail + Adapter + Fuel Pressure Regulator purchase. 

- Rail Specs Here

DO NOT MOUNT ADAPTER BLOCK/REGULATOR DIRECTLY TO RAIL!