Introducing the AMP EFI AXM-130 Dual Driver / Inverter – the perfect companion for your MS3Pro Mini. This module seamlessly converts any spare 5V Logic Level Spark Outputs, allowing compatibility with Ford TFI modules or MSD CDI modules requiring a 12V input.

Important Note: The AXM-130 is essential for the proper control of Ford TFI and MSD CDI ignition systems with the MS3Pro Mini.

The AXM-130 effortlessly accepts up to two 5V Logic Level Spark Outputs from your control unit. It then utilizes each signal to toggle a high-current driver capable of switching either a low-side (ground) or high-side (12V) triggered output/load.

Benefits

• Converts spare ECU Spark Outputs: turns used Spark Outputs into programmable and PWM outputs
• Enabling control of various conventional loads: like fan relays, boost controllers, and more.

Common Use Cases

• Ignition Box 

            --TFI module

            --CDI box

• Relay

            --Fan

• Solenoid

            --Boost Controller

            --Water Methanol

            --Nitrous

Technical Details

• Selectable Output Configuration: Access selectable jumpers beneath the bottom cover to choose between ‘Normal‘ (going-high – 12V) or ‘Inverted‘ (going-low – ground) output signals.

             --‘Normal‘ (going-high – 12V) - Use for TFI Modules, CDI box, Tachometer ect.

             --‘Inverted‘ (going-low – ground) - Use for driving most relays/solenoids/ect.

• Activation Response: The output signal activates whenever the 5V input signal is active.

Upgrade your ignition control system effortlessly with the AMP EFI AXM-130 Dual Driver / Inverter. Unlock new levels of control and flexibility for your high-performance setup.